Color Steel Composite Plate Various Plate Performance Introduction

Color Steel Composite Plate Various Plate Performance Introduction



Galvanised sheet

(1) Color coated plate

The base plate is hot galvanized or aluminized zinc plate, there is also the use of electro-galvanized base plate, surface paint by bending does not fall off.

For composite plate with colour steel plate is generally two coating a baking (two coating a), and two coating two baking (two coating two) or there are quality problems such as loose edge serious, middle loose heart, leakage of coating, large serrated edge, serious oval, uneven and so on can not be used for the production of composite plate.

(2) Galvanised sheet

Bad bonding effect is sometimes not very good and needs to be dealt with.

(3) Stainless steel plate

Good corrosion resistance, toughness is difficult to process; bonding effect is sometimes not good, need to deal with.

(4) Aluminium foil

Reinforced aluminium foil is a composite material with glass fibre reinforcement between aluminium foil and kraft paper, with functional characteristics such as fire retardant, fireproof, etc. It is also beautiful, durable and ideal for a new generation of heat insulation, thermal insulation and sound insulation.

(5) PVC

The main raw material of PVC foam board is polyvinyl chloride (PVC), which is characterised by a flat and beautiful surface, light weight, flame retardant, moisture resistant, sound insulation, corrosion resistant, easy to cut, good weather resistance, acid and alkali resistant and easy to clean.

(6) Trilaminate

Due to the limited length of each plywood, the compactness is not very good and the cracking phenomenon is difficult to solve.

__________________________

Whatsapp/Tel: 17712952852

E-mail:safs121@safsteelstructure.com

Website:www.safsteelstructure.com/

评论

发表评论

此博客中的热门博文

The development status of the space frame structure

图片
The development status of the space frame structure space frame   structure has been developed greatly in the last 30 years, and has been widely used inside and outside. space frame   structure plan arrangement is flexible, space shape is beautiful, convenient for building shape processing and decoration, decoration, can adapt to different span, different plane shape, different support conditions, different functional needs of the building.   Especially in the roof structure of large and medium span, the space frame   structure shows its superiority and is used in large number of large sports buildings, public buildings, industrial buildings, and also widely used in the roof of some small buildings, such as gas stations, toll stations, large canopies. In recent years, with the wide application of electronic computers and the development of computing technology, the design efficiency of the space   frame structure has been greatly improved. The construction and installation of the space
阅读全文

Cooling method of steel building structure

图片
 Steel structure plant mainly refers to the main load-bearing components are composed of steel. Including steel columns, steel beams, steel structure foundation, steel roof truss (of course, the span of the factory is relatively large, basically now are steel structure roof truss), steel roof, pay attention to the wall of steel structure can also be maintained by brick wall. Due to the increase of China's steel production, many have begun to use steel structure plants, which can also be divided into light and heavy steel structure plants. Industrial and civil construction facilities made of steel are called steel structures. 1. Heat preservation and cooling: Steel structure plant insulation film can isolate most of the solar radiation and conduction heat, reduce the indoor greenhouse effect. Then the temperature of the plant is greatly reduced to improve the environment of the steel structure plant. The commonly used methods now have the following two choices: the steel structure
阅读全文

What is the truss welding method?

图片
  truss roof Most of the rods in joist structures are welded at the nodes. Before welding, the webs and chords need to be cut in advance according to the shape of the weld seam of each member to be welded, which requires cutting of the web ends and slotting of the chords. Since the joist structure is intersected by coherent line between the rods and rods, the shape of rod end section is complicated, so in the actual cutting process, two methods of mechanical automatic cutting process and manual cutting process are generally used.
阅读全文