Featured Articles

Corrosion Protection Processes and Quality Control for Steel Structures

-
图片
 Corrosion Protection Process for Steel Structures Corrosion protection processes for steel structures are essential for ensuring that steel structures remain in good condition over the long term. This article provides a detailed overview of the various steps involved in these processes, including surface preparation, priming, coating application, quality control, and final inspection and acceptance. Surface treatment Surface preparation is the first step in the corrosion protection process. Its primary purpose is to remove dirt, grease, rust, and other contaminants from the surface of steel structures to improve coating adhesion and corrosion protection. Surface preparation includes the following steps: Cleaning: Removing grease, dirt, and dust from the surface of steel structures using solvents or detergents. Degreasing: Removing grease and wax-like substances with an alkaline degreaser to improve coating adhesion. Rust Removal: Removing rust and other corrosion products from the...
发表评论

What is the difference between blanking plant and cone ?

-




The blanking plant and the cone of the space frame mainly play the role of connecting the steel pipe and the bolt, and bear the tension and pressure from the rod.

When the diameter of the steel pipe of the rod is ≥ 76mm, the conical head connection should be used;

when the diameter of the steel pipe of the rod <76mm, the blanking plate connection can be used.


Join us and learn about steel construction together!

————————————————

Whatsapp/Tel:+ 86/13056229023

E-mail:safs121@safsteelstructure.com

评论

发表评论

此博客中的热门博文

What is a coal bunker?

-
图片
Coal bunker , is a structure used for storing coal. Coal bunkers play an important role in thermal power plants, coal mines and coal marshalling stations. Depending on the specific application scenario and design, there are various types of coal bunkers, such as circular coal bunkers, square coal bunkers and open coal yards. Safety Management of coal bunkers Preventing spontaneous combustion of coal: Since coal itself contains certain moisture and volatile substances, long-term exposure to the air may lead to spontaneous combustion, so the safe management of coal bunkers is of great significance in preventing spontaneous combustion of coal. Ensure the quality of coal: coal in the coal bunker usually needs to be stored for a long time, if not managed properly, it may lead to the decline in the quality of coal, such as sulphurisation, weathering and other phenomena, so it is necessary to ensure the quality of coal by strengthening the safety management of the coal bunker. Improve the eco...
阅读全文

What is the difference between a single-layer reticulated shell and a double-layerreticulated shell?

-
图片
  The differences between single-layer reticulated shells and double-layer reticulated shells are as follows: Structural Configuration   Single-layer reticulated shell: Composed of a single layer of members, with the members directly connected to form a grid structure . The node configuration is relatively simple, typically employing rigid connections that allow the members to bear not only axial forces but also bending moments and shear forces.   Double-layer reticulated shell: Consists of upper and lower parallel layers of members connected by web members, forming a truss-like structural system. The nodes are generally hinged, and the members primarily bear axial forces. Its configuration is relatively complex, requiring more members and nodes to ensure structural stability and load-bearing capacity. Structure Single-layer mesh shell: composed of one layer of rods, the rods are directly connected to form a mesh structure, the node structure is relatively simple, usually...
阅读全文

What are the differences between bolted ball grids and welded ball grids?

-
图片
 There are a number of differences between bolted ball grids and welded ball grids in terms of fabrication, construction and design. The following are specific comparisons: 1. Manufacturing process: The manufacturing of bolted ball net frame is mainly carried out in the factory, using mechanical shot blasting to remove rust, and then spraying paint, plastic spraying or zinc spraying treatment to enhance corrosion resistance.  The steel pipe and welded seam of welded ball mesh frame can only be descaled manually on site, and then paint or fireproof coating is brushed. For the welded part, it needs to be descaled and brushed at a stage to maintain, which increases the cost of later use and affects the safety of the structure. 2. Construction process: 70% of the workload of bolted ball grid frame is prefabricated in the factory, 30% of the workload is installed at the site, only a wrench is needed to tighten the bolts at the site, which is easy and fast, and can be constructed ...
阅读全文